Semi-Regenerative Reforming Catalyst

Product characteristics

GRS-CZ10 reforming catalyst is a new generation of semi-regenerative reforming catalyst that adopts advanced preparation technology, replaces some platinum components with new component X, and has a rhenium-platinum ratio of 2. It has the following characteristics:
○High purity of carrier crystal phase, concentrated pore distribution, stable structure and high strength
○Compared with the catalysts currently used in industry, the activity is equivalent and the selectivity is better
○The carbon deposition rate is obviously lower than that of the existing industrial catalysts, and the carbon deposition is reduced by more than 25%, which has better stability and can be used for a long time.
○Regeneration activity can be restored to the level of fresh agent
○The platinum content is currently the lowest among the catalysts, which greatly reduces the cost of the catalyst.

Properties

Code	GRS-10
Shape	column
Spec.,mm	Φ1.6×3-8
Specific pore volume, ml/g	0.45-0.55
Specific surface, m²/g	≥180
Bulk density, g/ml	0.72- 0.82
Compressive strength，N/cm	≥100
Pt/Al2O3, m%	≥0.09
Re/Al2O3, m%	≥0.19
X/ Al2O3 ,	≥0.29
Cl/ Al2O3,	1.30±0.30
Catalytic activity %	≥115

Application

Suitable for medium and low pressure semi-regenerative fixed-bed reformers to produce high-octane gasoline components or chemical aromatic products; can be used alone or mixed with other reforming catalysts

Packing

Closed tight in special iron drum lined with plastic bag, 140Kg/drum

Storage & Notes

○Avoid wter and moisture; no contact withother chemicals and hydrocarbon
○No throwing or rolling of iron drums when carrying them
○Products can leave factory in oxidized or reduced status
○Operate strictly in accordance with GRS-10 catalysts’ directions for use, and under the guidacne of prefessional technicians.